mbx5 + mamba max + lipo 4s + WHAT MOTOR ???

[kevin1]

hello,
i had a project whith
the mugen mbx5, the mamba max (100A max), a lipo 4s (limited at 80A),

and i don't know what motor choose ...

what can i put on my car?
and I dont whant feigao's motors

what do you thing about the align 600XL in 4s whith gear in 16th ? it's good or not ?

thanks

[Arct1k]

I believe 4s is a little light for 600xl -

1509/1.5Y 2400
1512/2D 2550
1512/2.5D 2050
1515/1Y 2200

Or try briang's motor selector

http://www.scriptasylum.com/rc_speed/index.html

[lincpimp]

Your 80 amps max 4s lipo will be the limiting factor. Gearing over 35mph will most likely overdraw the batteries, regardless of the motor used. The align xl is a decent choice for a motor, however the 16t pinion will not get you much more than 30mph. The motor kv of 1670 is too low for 4s, total rpm will be around 24,000. I would suggest a feiago 9xl, but you do not want a feigao. Any specific reason?

[kevin1]

Originally Posted by Arct1k

I believe 4s is a little light for 600xl -

1509/1.5Y 2400
1512/2D 2550
1512/2.5D 2050
1515/1Y 2200

Or try briang's motor selector

http://www.scriptasylum.com/rc_speed/index.html

1509/1.5Y 2400 --> we had say to me that it is a litte light ...
1512/2D 2550 --> 125A , it's too much for my lipo and esc !
1512/2.5D 2050 --> maybe
1515/1Y 2200 --> 110A, it's too much for my lipo and esc !

and where buy this NEU motors ? here they are "out of stock"

[kevin1]

Originally Posted by lincpimp

Your 80 amps max 4s lipo will be the limiting factor. Gearing over 35mph will most likely overdraw the batteries, regardless of the motor used. The align xl is a decent choice for a motor, however the 16t pinion will not get you much more than 30mph. The motor kv of 1670 is too low for 4s, total rpm will be around 24,000. I would suggest a feiago 9xl, but you do not want a feigao. Any specific reason?

I had have a lot of problems whith feigao,
I don't know explain this in english, sorry

and OK for the align, it isn't good

what do you think about hacker and lehner motors ? or others

[lutach]

You could try one of the Mega ACn22/30/1E, ACn22/35/1E, ACn22/45/1 or 1E.

[kevin1]

Originally Posted by lutach

You could try one of the Mega ACn22/30/1E, ACn22/35/1E, ACn22/45/1 or 1E.

ok thanks,
but where buy this motors ?

[Arct1k]

Hacker are good but too much $'s new

Lehner are great and two pole so will be really nice with MM

Those amp ratings are a little over-rated - any motor will pull what it can under load.

Just get the load right and you'll be fine...

[lutach]

Originally Posted by kevin1

ok thanks,
but where buy this motors ?

Ask Mike to get them for you if he can't just go to www.megamotorusa.com. This is my truggy with the ACn22/30/2 on 6S:

http://www.youtube.com/v/EAtcnCTdjAI&hl

The last time I drove the truck it only spiked at 75A.

[kevin1]

thanks but where buy mega motors (directly link) ?

and where to buy Neu 1512/2.5D ? (I think I'll take this motor)

[lutach]

Originally Posted by kevin1

thanks but where buy mega motors (directly link) ?

and where to buy Neu 1512/2.5D ? (I think I'll take this motor)

http://www.megamotorusa.com/Shopping...s+ACn22+Series

[kevin1]

Originally Posted by lutach

http://www.megamotorusa.com/Shopping...s+ACn22+Series

ok thanks, but in France , nobody use this motors,

1/ so I want to know, if they are good motors, reliable and sturdy ?

2/ at the nivel of power, how they are ?

3/ I see the on the front of this motors, there is big ventilation,
so all dust go in the motor, no ?

4/ and if http://www.megamotorusa.com are serious ?

thanks

[lutach]

Originally Posted by kevin1

ok thanks, but in France , nobody use this motors,

1/ so I want to know, if they are good motors, reliable and sturdy ?

2/ at the nivel of power, how they are ?

3/ I see the on the front of this motors, there is big ventilation,
so all dust go in the motor, no ?

4/ and if http://www.megamotorusa.com are serious ?

thanks

1. Great motor. I own the Mega ACn22/30/2.
2. The Mega ACn22/30/2 is in my truggy (MBX5T) smaller than the other, but powerful.
3. Get some thin foam or fine screen mesh and wrap around the opening.
4.http://www.megamotor.cz/new/script/m...5&language=eng

[kevin1]

Originally Posted by lutach

1. Great motor. I own the Mega ACn22/30/2.
2. The Mega ACn22/30/2 is in my truggy (MBX5T) smaller than the other, but powerful.
3. Get some thin foam or fine screen mesh and wrap around the opening.
4.http://www.megamotor.cz/new/script/m...5&language=eng

there is a problem with th language of you link ? he is in czech !

and I think i 'll take the ACn22/35/1E

he is good for my buggy in 4s ?

the axis for gear is 5mm ?

thanks

[lutach]

Originally Posted by kevin1

there is a problem with th language of you link ? he is in czech !

and I think i 'll take the ACn22/35/1E

he is good for my buggy in 4s ?

the axis for gear is 5mm ?

thanks

Just go to www.megamotor.cz and select English.