MM ESC and voltage + other questions :D

[kingiggy262]

Originally Posted by azjc

if you wanted to run a MM esc in a Revo you could pair it up with a Neu 1515/1y , a GOOD 4cell lipo and have a pretty decent setup.

Thats what I have on my Revo with a TrueRC 4s 8000mah lipo and it is definitely an awesome setup! I was running a Feigao 8XL but it would heat up real quick and the Neu seems to run smoother than the Feigao with the new MM firmware.

Originally Posted by kingiggy262

Thats what I have on my Revo with a TrueRC 4s 8000mah lipo and it is definitely an awesome setup! I was running a Feigao 8XL but it would heat up real quick and the Neu seems to run smoother than the Feigao with the new MM firmware.

its good you are happy with the True Rc cells, trying

a pack with Enerland cells will give you a noticable improvement

[legobrains]

To do the cap mod. you need 4 of these (cause 4 smaller ones are better then one big one)
http://search.digikey.com/scripts/Dk...me=493-1866-ND
35v 330uf, low ESR.

then you solder them so all the negatives go to the black wire, and positive to the red wire.

Thanks to metal man for describing this al to me: