Rustler gearing

I'm still with 48 pitch, but I run the CF HPI spur gears. Those things are nice and rigid so I don't get any flexing that I used to get with straight plastic spurs (made stuff strip when the gear would flex).

So far so good for me.

[brijar]

I've used just plastic 48p spurs on my Rusty for quite a while, and have stripped quite a few. This was mostly due to having my slipper set real tight (was using old style slipper), but now I've replaced it with a REVO style one and loosened it a good bit. I only have problems when I jump real hard and it moves the motor out of place.
I would like to put 32 or mod 1 pitch on it, just so I never have to worry about stripping, but I can't find a small 32p pinion or a large enough spur to keep my gearing right (running Mamba Max 5700 on 3s and 4s A123 cells, geared 15/90, pretty much the sweet spot for my Talon tires, 20/90 for my Road Rages).

Brijar!!!