How did the trip to China go?

[JERRY2KONE]

It is always fun to travel in Asia. So any word on approx when the first motor will be available to us????

[JeffEmbracedDC]

Originally Posted by Pdelcast

Yep! 1512/1Y will be the first, with Kv of about 1650

(dang jet lag! Go to sleep at 11:00pm, wake up at 2:00am wide awake!)

Hmm? I read the 1515/1Y (2200kv) would be first with a 1512/1Y (2750kv) would come afterwards. Am I incorrect? Thanks!

-Jeff

[Pdelcast]

Originally Posted by JeffEmbracedDC

Hmm? I read the 1515/1Y (2200kv) would be first with a 1512/1Y (2750kv) would come afterwards. Am I incorrect? Thanks!

-Jeff

Oh man, I was tired and totally out of it...

First available is 1515/1Y at 2200Kv
Second will be the 1512/1Y at 2650Kv


Sorry!!!!!

[Arct1k]

Funny I was just writing that I think you got the winds wrong :)

Jet lag is so much fun!

Originally Posted by Pdelcast

Yep! 1515/1Y will be the first, with Kv of about 2200
Second will be the 1512/1Y with a Kv of about 2650

(dang jet lag! Go to sleep at 11:00pm, wake up at 2:00am wide awake!)

[lutach]

Patrick,

Will you be doing custom motors as per client's specs?

[Pdelcast]

Originally Posted by lutach

Patrick,

Will you be doing custom motors as per client's specs?

Custom motors will be available through Neu Motors.

Patrick

[lutach]

Originally Posted by Pdelcast

Custom motors will be available through Neu Motors.

Patrick

Different types. Not like the Neus.

[Pdelcast]

Originally Posted by lutach

Different types. Not like the Neus.

I don't know what you mean then. What types?

[sleebus.jones]

Hmmmmm. Where's that 1750Kv motor?

[lutach]

Originally Posted by Pdelcast

I don't know what you mean then. What types?

If I design a motor and run the idea by you, will you be able to do it.

[Pdelcast]

Originally Posted by lutach

If I design a motor and run the idea by you, will you be able to do it.

Possible -- but it costs about $100K to tool for motor production -- so if it's just a 1-off, I'd have to say no.

[BrianG]

That would be one expensive motor! Maybe get two or three motors done to reduce costs to a paltry $50k to $33k each.

[lutach]

Tell me about it . I was thinking more of the lines of a few thousands, but I'll just wait to see what the other places will come up with. I'm talking with a few manufacturers, but the delay is driving me nuts.

[Pdelcast]

Originally Posted by lutach

Tell me about it . I was thinking more of the lines of a few thousands, but I'll just wait to see what the other places will come up with. I'm talking with a few manufacturers, but the delay is driving me nuts.

Well, if it's a viable motor for commercial production, we'll take care of the NREs... :)

[lutach]

Originally Posted by Pdelcast

Well, if it's a viable motor for commercial production, we'll take care of the NREs... :)

I'll contact the other companies I have asked to do the motors and will see what they say. If they won't be able to do it, I'll send you all the information about the motors.