Want To Test The MMM

[bl-is-future]

Originally Posted by JOEX

Ouch!

Can you remind me again when I get a brushless motor

Just make sure you post when you get a BL motor and i will try to remember to remind you!

[lincpimp]

I am sure the titans can handle 4s, they are 23turn 550 motors.

[bl-is-future]

Originally Posted by lincpimp

I am sure the titans can handle 4s, they are 23turn 550 motors.

yeah i wasnt sure. i know the stock 550 motors on the e savage wouldnt take 4s though.

[JOEX]

They didn't do well with extended periods of full throttle, hard braking and cookies on wet pavement


When wiring the two motors to the MMM do I connect both reds to red and both blacks to black?

[lincpimp]

Originally Posted by bl-is-future

yeah i wasnt sure. i know the stock 550 motors on the e savage wouldnt take 4s though.

Really? I thought the e-savage ran a pair of 6cell nimhs in series, about the same voltage as a 4s lipo?

I run the traxxas titan 12t from the xl5 rustler/pede on 3s all the time. They are really good motors, and cheap too. I still have a few brushed vehicles, but they are all lipo powered now!

[bl-is-future]

Originally Posted by lincpimp

Really? I thought the e-savage ran a pair of 6cell nimhs in series, about the same voltage as a 4s lipo?

I run the traxxas titan 12t from the xl5 rustler/pede on 3s all the time. They are really good motors, and cheap too. I still have a few brushed vehicles, but they are all lipo powered now!

yeah it does but something about the MM and 3s lipo they didnt like at all. Seized both of them right up, could be jsut faulty motors too. i only ran it stock 2 times and then the MM and the 3s went in. then that fried so a MM and 5700 went in and that ran beautiful.