Ebay MT 100 amp esc

[lutach]

I'll be watching this thread. Let me know how the controller performs with other motors you guys have.

[junkman]

Well, I just put the 60a through its paces. I put put a ubec on it and hooked it up to the fan as well. Fresh charged up 3s 4000, I ran a good 15 minutes mostly wide open up and down the road, and about 3" grass. Everything survived, but the esc was HOT, so was the motor. Up until now I had really just ran it back and forth on the road, and driveway. It really never has heated up much. The grass I think was pretty hard on it. It never gave any signs of getting hot, ran pretty much the same start to finish. I need to drop a couple teeth on the pinion, I am going to have to go up on the spur as a 20 is the smallest I can get on it right now. This is the motor I'm running
http://www.hobbycity.com/hobbycity/s...ess_Motor_(FIN) and honestly its too much on 3s for the light truck. The thing is all over the place.