RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#31)
bl-is-future
RC-Monster Aluminum
 
bl-is-future's Avatar
 
Offline
Posts: 974
Join Date: Feb 2008
Location: Midland, MI
10.10.2008, 01:13 PM

Better to have it and not need it than to need it and not have it!


I fly, I drive, but most of all I crash.
   
Reply With Quote
Old
  (#32)
Five-oh-joe
Guest
 
Posts: n/a
10.10.2008, 01:46 PM

The medusa's holes haven't been a problem for me (running the 50mm 4800kv motor on 3s....). Brushed motors have open endbells, and vents in the cans. They hold up just fine offroad, and if anything, they have more potential to get screwed up because the windings are moving at high angular velocities, so any incoming debris can get smacked by the arm, and possibly sever a winding. Let's also not forget about the commutator and brushes...

The open endbell isn't a big deal unless you have a habit of running through iron filings.

Of course, if it bothers you, cover up the holes like others are doing. Problem solved.

Last edited by Five-oh-joe; 10.10.2008 at 01:47 PM.
   
Reply With Quote
Old
  (#33)
brushlessboy16
Im not dark, Im over ripened! xD
 
brushlessboy16's Avatar
 
Offline
Posts: 5,607
Join Date: Sep 2007
Location: Westampton NJ
10.10.2008, 02:14 PM

Quote:
Originally Posted by whitrzac View Post
ok, ok I get it, there awsome motors, but I just don't need something with that amount of power, yet.....
thats why you turn the puch and timing down (or up) to tone it down..


Benjamin White
R/c Monster Team Driver
Jq the car, LST, Sportweks turmoil pro
Unconventional Techniques, Superior Results
  Send a message via Yahoo to brushlessboy16 Send a message via AIM to brushlessboy16 Send a message via MSN to brushlessboy16  
Reply With Quote
Old
  (#34)
whitrzac
Can't catch this...
 
whitrzac's Avatar
 
Offline
Posts: 1,142
Join Date: Oct 2008
Location: baraboo, WI
10.10.2008, 03:57 PM

Quote:
Originally Posted by brushlessboy16 View Post
thats why you turn the puch and timing down (or up) to tone it down..
first off, I;'m a teen making $500 a month with $100 going towards a car payment, $100+ going to insurence, and $200 going to savings, I don't have much mony left for RC, other wise, I would allready have the motor on its way here.
   
Reply With Quote
Old
  (#35)
brushlessboy16
Im not dark, Im over ripened! xD
 
brushlessboy16's Avatar
 
Offline
Posts: 5,607
Join Date: Sep 2007
Location: Westampton NJ
10.10.2008, 04:03 PM

Quote:
Originally Posted by whitrzac View Post
first off, I;'m a teen making $500 a month with $100 going towards a car payment, $100+ going to insurence, and $200 going to savings, I don't have much mony left for RC, other wise, I would allready have the motor on its way here.
no sob story needed.. im 16. have peiced together 3 cars. first one took me a year start to finish. and i dont have a job- all off xmas and bday money..


Benjamin White
R/c Monster Team Driver
Jq the car, LST, Sportweks turmoil pro
Unconventional Techniques, Superior Results
  Send a message via Yahoo to brushlessboy16 Send a message via AIM to brushlessboy16 Send a message via MSN to brushlessboy16  
Reply With Quote
Old
  (#36)
whitrzac
Can't catch this...
 
whitrzac's Avatar
 
Offline
Posts: 1,142
Join Date: Oct 2008
Location: baraboo, WI
10.10.2008, 04:12 PM

its not a sob story, its just an explanation to why I'm not buying a $100 motor right now, an why I'm pissed that CC isn't going to fix my motor under warrenty.
   
Reply With Quote
Old
  (#37)
Five-oh-joe
Guest
 
Posts: n/a
10.10.2008, 04:50 PM

Well, think of it from their point of view. If you have no documentation to prove you bought the item and that it's still under warranty, then they can't necessarily do a whole lot for ya. It's like going to court with no evidence... kinda pointless.

Last edited by Five-oh-joe; 10.10.2008 at 04:51 PM.
   
Reply With Quote
Old
  (#38)
Erevocanuck
Guest
 
Posts: n/a
10.10.2008, 04:50 PM

Can`t you get the motor repaired for under $50?CC does do non warranty repairs

http://www.castlecreations.com/support.html
   
Reply With Quote
Old
  (#39)
Arct1k
RC-Monster Mod
 
Arct1k's Avatar
 
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
10.10.2008, 04:52 PM

Doh!
   
Reply With Quote
Old
  (#40)
big greg
Guest
 
Posts: n/a
10.10.2008, 05:00 PM

Quote:
Originally Posted by whitrzac View Post
first off, I;'m a teen making $500 a month with $100 going towards a car payment, $100+ going to insurence, and $200 going to savings, I don't have much mony left for RC, other wise, I would allready have the motor on its way here.
200$ in the savings theres your rc money lol. no need to save, just kidding
   
Reply With Quote
Old
  (#41)
Unsullied_Spy
RC-Monster Titanium
 
Unsullied_Spy's Avatar
 
Offline
Posts: 1,609
Join Date: Aug 2008
Location: Bozeman, Montana
10.10.2008, 05:31 PM

Quote:
Originally Posted by RBMike View Post
I also have a neu with the RCM covers on it & it actually gets more dirt in it than the Medusa with the wide tape over the ends. I peel it off once in a while & blow it out with air & less comes out than out of the Neu. The Medusa is holding up well & has many hours on it. I think neu's are the best but for the money I have no complaints about the Medusa & it is lighter than the Nue. Where you at in Montana?
OK, sounds good. I forgot completely about brushed motor running open, just gotta spray them out every couple of runs and they're good. I live about 8 miles south of Bozeman.
  Send a message via AIM to Unsullied_Spy Send a message via MSN to Unsullied_Spy  
Reply With Quote
Old
  (#42)
whitrzac
Can't catch this...
 
whitrzac's Avatar
 
Offline
Posts: 1,142
Join Date: Oct 2008
Location: baraboo, WI
10.10.2008, 08:16 PM

Quote:
Originally Posted by big greg View Post
200$ in the savings theres your rc money lol. no need to save, just kidding
LOL, so true, yes CC does non warrenty repairs, but its $45+$5 to ship it to them
   
Reply With Quote
Old
  (#43)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
10.11.2008, 01:02 AM

i get $50/week to pay for everything (dont have a car) and im 17... took me 12 months to put together my car and saved up for a neu motor. lucky i got it when the exchange rate was at its highest point (98c/$1) now its like 70c/$1.

save up, wait some more and have fun!


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Old
  (#44)
Sammus
RC-Monster Titanium
 
Sammus's Avatar
 
Offline
Posts: 1,161
Join Date: Jan 2008
Location: All over Australia.
10.11.2008, 05:22 AM

Quote:
Originally Posted by tc3_racer_001 View Post
i get $50/week to pay for everything (dont have a car) and im 17... took me 12 months to put together my car and saved up for a neu motor. lucky i got it when the exchange rate was at its highest point (98c/$1) now its like 70c/$1.

save up, wait some more and have fun!
65c actually now I don't feel so guilty for spending my $3000 tax return on rc stuff from the states lol. It's more like an investment

And don't expect it to go up anytime soon either...theyre pushing another 100pt rate cut within the next few months which will probably cause our dollar to drop another 10c. at 17 I guess you didn't feel the pain for us r/c nuts of the '01 exchange rate of 47c.. still cheaper to buy it from tower than getting it retail in oz lol.

Last edited by Sammus; 10.11.2008 at 05:24 AM.
   
Reply With Quote
Old
  (#45)
George16
Supermaxx
 
George16's Avatar
 
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
10.11.2008, 05:50 AM

Quote:
Originally Posted by whitrzac View Post
I paid to have them replace the MM, but the motor was NIB from the LHS!!!!!

and dam right I'm complaining about the motor, it has a manufacuring defect and should be replaced
Then do this :
Quote:
Originally Posted by whitrzac
LOL, so true, yes CC does non warrenty repairs, but its $45+$5 to ship it to them


Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer)
Predator with OS .21TM
Supermaxx with Mach .26
Revo with OS .18TZ
Kyosho ST-RR Conversion
Ofna CR with Tekin ESC/Motor (2)
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com