Testing a couple of 1/10 120A ESC (Pictures of the 200A is in here too) - Page 2 - RC-Monster Forums

snellemin · 09.16.2008, 04:24 PM

If you can get the 6s capable feature to work on the 200A one, you will have another buyer. Could you pm me the est. price?

lutach · 09.16.2008, 04:30 PM

Quote:

Originally Posted by snellemin

If you can get the 6s capable feature to work on the 200A one, you will have another buyer. Could you pm me the est. price?

I'm not 100% sure if this units can handle 6S though. I'll have to actually get another test unit to see if it does. This are meant for 1/10 scale and as we can see, 2S lipos seems to be the standard for racing and this were meant for racing. I'm not going to get prices for the 200A yet as I need to test it. I did find a little problem with reverse that needs to be addressed, but everything else works like it should. I have the 200A ESC set for forward/brake only now.

lutach · 03:57 PM

Here is a video of the 200A ESC in action. I'm using my old Kyosho KX-One and it's geared for torque so it's not fast at all plus my rear diff is slipping a bit.

tom255 · 10.11.2008, 02:43 PM

Hi Lutach
I found and bought on ebay with exaclty same footprint ESC but different brand than SP or Feigao. And its rated 100A. Is it support 4S lipo with UBEC? Did you tried it on 4S?

lutach · 10.11.2008, 04:44 PM

Quote:

Originally Posted by tom255

Hi Lutach
I found and bought on ebay with exaclty same footprint ESC but different brand than SP or Feigao. And its rated 100A. Is it support 4S lipo with UBEC? Did you tried it on 4S?

I will try 4S soon with my drag car. You have to disable the BEC to run 4S. Did yours come with the program card or you had to buy it separately? I know one other guys from Spain that bought one, but the company sold him the wrong program card and they didn't offer the program card that is supposed to work with the ESC.

stum · 11:05 PM

I'm about to buy a MM w/ BEC unless someone can hook me up with directions to one of these truck esc's. 120-200a would be nice... this is for my soon to be completed Losi 8ight-T tekno conversion. I'm running a neu 1515 1.5d in it... 4s lipo config

lutach · 10.12.2008, 10:41 AM

Quote:

Originally Posted by stum

I'm about to buy a MM w/ BEC unless someone can hook me up with directions to one of these truck esc's. 120-200a would be nice... this is for my soon to be completed Losi 8ight-T tekno conversion. I'm running a neu 1515 1.5d in it... 4s lipo config

The above mentioned ESCs are for 1/10 scale and not for 1/8 scale. The software that they have is best suited for 2 pole motors unless some manufactures are willing to do a 4 pole motor with sensors.

BL_RV0 · 10.12.2008, 12:20 PM

I might get one. After my HV Hyper ST is done, It looks like I'm getting bl-is-future's Hyper 7. I found a great deal on a 8xl, and will run on 4s. Your 120a ESC looks like it'll work well for my needs.

lutach · 10.12.2008, 12:22 PM

Quote:

Originally Posted by BL_RV0

I might get one. After my HV Hyper ST is done, It looks like I'm getting bl-is-future's Hyper 7. I found a great deal on a 8xl, and will run on 4s. Your 120a ESC looks like it'll work well for my needs.

My 1/10 ESCs will work fine with the Novak HV motors. I will try the 200A with 4S lipos to see how it does and I'll post something here.

BL_RV0 · 10.12.2008, 12:25 PM

I'm not a novak fan. Not a fan of novak's fans or novak's fan club for their fans.

lutach · 10.12.2008, 12:33 PM

Quote:

Originally Posted by BL_RV0

I'm not a novak fan. Not a fan of novak's fans or novak's fan club for their fans.

Well, I wasn't a fan of Novak, but now with the 2 motors they built and the Velocity 4.5R kicking some butt, I can find myself liking them. I will soon be making some speed runs with the HV2.5 and later the HV1.5 motors. I hope they do good, because I plan on making a worl setting drag car to use the HV2.5 motor in. Picture this, if the 4.5R does good in drag racing, then the HV2.5 will be a killer. I'll try to be the first into the 1.1 or bellow.