Neu 1512, 1.5d (3300Kv) on 4s in crt.5

Originally Posted by Ryu James

nope. never had any heat problems. it has been a couple of weeks since i've run my buggy but if i recall the temps were around 120* and less all around.

120 is amazing after 30min of run time on a track....I'm real glad to hear that because my 1.5d should be here today and I was thinking I made a mistake getting a 3300kv motor for my crt.5 on 3s and 4s geared 14/46
I may just leave my feigao 9l in in my crt.5 and put this 1.5d in my crt 1x

the crt.5 runs very sweet with the 9l....a little squrrily with the short chassis but Mikes new extended chassis should cure that


think the 1.5d would push my x1 without issues on 4s?

[Ryu James]

Originally Posted by bustitup

120 is amazing after 30min of run time on a track....I'm real glad to hear that because my 1.5d should be here today and I was thinking I made a mistake getting a 3300kv motor for my crt.5 on 3s and 4s geared 14/46
I may just leave my feigao 9l in in my crt.5 and put this 1.5d in my crt 1x

the crt.5 runs very sweet with the 9l....a little squrrily with the short chassis but Mikes new extended chassis should cure that


think the 1.5d would push my x1 without issues on 4s?

it will push it no problems whatsoever. i have used mine in my losi 8t without any troubles but i upgraded to the 1515 1.5d on 5s and that is BADASS!! seems faster than the 1512 on 4s. but regardless, the 1512 will push your x1 easily. you wont be disappointed. and the crt will be sweet too. probably better for the crt. 14/46 should be good for the gearing too. i ran 13/48 in the buggy and 15/48 in the truggy. both stay cool and are fast as hell.