Quote:
Originally Posted by emaxx 101
...Is there a way to set the desired voltage per cell and still have it charge to full capacity? I am using a 3s 5000mah 15c lipo pack. Right now, it charges to it's max capacity (4.2v/cell), and I would like it to be at 3.3v/cell, but still charge to full capaicty. Does anyone know how? Thanks!
|
About the full capacity question: Like Arct1k said, nope.
Anything lower than 4.2v will reduce the capacity. You can get away with lowering the CC/CV threshold to around 4.0v/cell and not lose too much, but you will still lose something. I have my Xtrema set to 4.15v/cell just as a little safety margin in case a pack is not fully balanced before the threshold, and haven't noticed any runtime loss. But I don't exactly time it either.
Threaded Mode
