Big big Feigao

[What's_nitro?]

Another shameless plug by Lincpimp.....

[MetalMan]

Originally Posted by lincpimp

How about a 1521 1y... Used of course!

I was actually looking at that motor... But Mike didn't have any in stock. You think it's possible I will have a PM waiting for me in the next few minutes?

[lincpimp]

Originally Posted by What's_nitro?

Another shameless plug by Lincpimp.....

Actualluy I only have 1521 2y and 2.5y motors, too low kv for 8s, IMO. I plan to run the 2y in my savvy on 10s with a lt10 esc. I mainly mentioned that as i have found 1521 1y motors reasonably cheap before... No plug here. But I do not have any shame either!

Originally Posted by MetalMan

I was actually looking at that motor... But Mike didn't have any in stock. You think it's possible I will have a PM waiting for me in the next few minutes?

As above, I do not have that motor, (well I do have one but it is for the lst2)but I can look around for you!

[MetalMan]

Ah I see. The other day I looked on Ebay but didn't come up with anything suitable. You sure you don't wanna scrap the LST2 project?

[lincpimp]

Originally Posted by MetalMan

Ah I see. The other day I looked on Ebay but didn't come up with anything suitable. You sure you don't wanna scrap the LST2 project?

Nah, if anything I may have to scrap the flm savvy... Just not measuring up to the lst... Plus I have the 6x6 lst to finish too, but that will get a hacker c50 xl.

I do wonder why your medusa if getting hot... I had a similar issue with a 60mm 1500kv in a buggy on 6s. It got hot, no idea why... I wonder if they have QC isuues with those motors? They are cheaper than a neu for a reason...