E-Revo to E-Slayer conversion Project

[Unsullied_Spy]

The gears themselves can handle BL power, you just need to lock it into either 1st or 2nd gear. If you want to use the E-Maxx tranny you'll want to borrow a dye grinder, you can Dremel it but it's soo much easier with a proper tool.

So out of the two gears I was thinking about locking it into second gear... Would first gear be better

Originally Posted by Cmendastrtduk

So out of the two gears I was thinking about locking it into second gear... Would first gear be better

you want 2nd gear only, it would be pretty slow with just first. brushless motors don't need automatic tranny's, unless it's purely for speed runs.

So with the transmission I was thinking could I just do the 3.3 revo gearing in hardened steel. Would that fit in the slayer transmission.....