brushless 1/5 4wd conversion about to begin! couple questions.

[emaxxnitro]

Originally Posted by lincpimp

A larger nitro tank, some al tubing arranged in a zig zag pattern with possibly a fan to blow air over it, and a small pump would work well. As long as it is setup properly a water cooling setup would not be very heavy or very big, but finding a pump that can handle a beating may be a challenge. A car w/s washer pump would be a good choice, they are pretty sturdy, and you could mount it to the side of the nitro tank with some creativity. No sure what voltage to run it on, as they produce a fair amount of volume on 12v. Maybe 6v off a ccbec or something like that. If I get bored I may make something!

you can get a radiator.
and a pump http://www3.towerhobbies.com/cgi-bin...?&I=LXDJR7&P=7

[nitrostarter]

Originally Posted by emaxxnitro

you can get a radiator.
and a pump http://www3.towerhobbies.com/cgi-bin...?&I=LXDJR7&P=7

I'm pretty sure thats the one the guy used... Good find!

[emaxxnitro]

Originally Posted by nitrostarter

I'm pretty sure thats the one the guy used... Good find!

no, he builds pumps with no moving parts. but he had a small 5 volt pump on his emaxx one time but i think it was from work though, so its not available to the public.
but that pump should work.
he also made his own radiator out of aluminum.
shoot i will just through in some pics

sorry guys no hands.... lol