My Uber Revo..

[Mentat]

Originally Posted by Kevlar

Those servos look awesome, and must perform as good as they look.. something else for me to look into..

thing about those servos above are that they can use 7.4v without any type of regulator. full 2s lipo! and hella large torque, there is a speed model too. $199 tho!

[Bondonutz]

Originally Posted by Mentat

thing about those servos above are that they can use 7.4v without any type of regulator. full 2s lipo! and hella large torque, there is a speed model too. $199 tho!

These (Hitek HSR-5990TG Robot servos) are rated to handle 7.4 as well and are 129.99 depending where purchased.

http://www.rcplanet.com/Hitec_HSR_59.../hrc35990r.htm

Size: 1.57" x 0.78" x 1.45" (40 x 20 x 37mm)
Weight: 2.39oz (68.00g)
Torque: 333.29 / 416.61 oz.in (6v/7.4v)
Speed: 0.17 / 0.14 sec @ 60 deg.
Operating voltage: 6.0 to 7.4V
Max speed: 0.17 sec/60 degrees at 6.0V
0.14 sec/60 degrees at 7.4V
Stall Torque: 24.0kg.cm (333.29oz.in) at 6.0V
30.0kg.cm (416.61oz.in) at 7.4V
Operating Angle: Max 180 degree
Connector wire length: 300mm (11.81in)