Rckcrwlr's Savage Flux HP...or is it?

[rckcrwlr]

First thing was to widen and strengthen the rear suspension. To accomplish this I am adding:

RPM Upper and Lower Arms
HPI Big Bore Alum Shocks
Integy Rear HD Hub Carriers
HPI Wide Track Conversion

Below is the comparison of the stock and Wide Track conversion.







Here is the stock suspension



Now the Bullet Proof Suspension

[rckcrwlr]

Next was the front end...

Added an Aluminum and Bearing Steering Crank



Here is the before picture of the front Suspension



After Picture, Alum Knuckles and Uprights, Big Bores, HD Wideners and 17mm to 23mm adapters
(waiting on the 24mm's from HPI)



Now just need to get my hands on a fast, high torque servo...
(time to dig in the drawer of the unknown)

[rckcrwlr]

Found a servo laying around...



And started painting. This is a screwy body so hope it looks OK when done...

[rckcrwlr]

Well...Here she is.........










Now it's time to get things running...