My HPI MT2 reborn (as electric of course)

[IGT_7x]

Here she is, my reborn HPI MT2 now sporting a brushless setup & an extended chassis. As you can see it's almost as long as my Slash. Now let's see how she performs

[IGT_7x]

More pics

[suicideneil]

Thats pretty sweet, Im guessing custom or aftermarket chassis + stretched too. Mean looking slash aswell

[IGT_7x]

Thanks, yes it is custom, actually it's from CKRCcrawlers.com, they have it as a kit. I just went ahead & used a Sidewinder ESC & Velineon motor, it should be enough since I'll be using 2-3s lipo. As far as the Slash it's been one hell of a truck, tough as nails.

[reno911]

Hey CKRC stuff. Glad yours turned out, and you got everything in the shipment. I worked there for a week. Literally, Jake is a bit of a skiddish dude. It has to be tough, because of the way Jake races... He makes some good stuff, and it is the best LHS in my area. However, do to a sticky situation I hold back my urges to shop local.

[swiftneed]

Hey I have two of those Hpi Mt2 I will be digging them up and trying a conversion and what were the necessary parts and anything custom?OK found it said sold out but requires quite a bit of work not like RCM drop in and go

[swiftneed]

I didnt see anything that said conversion can you let me know under what

[Bondonutz]

Both look pretty sweet, nice work !

[reno911]

Call them. It is no longer on the website but I am pretty sure they still have the custom lower and top plate for the chassis. As for everything else. I could probably get you the parts that are need if I asked what they were.

If they say no PM me I can check when I go in next time.

[reno911]

Nevermind it is still there.

http://www.ckrccrawlers.com/ckrcmt2s...on-p-2450.html

[IGT_7x]

The kit will include everything you would need for the conversion, but it does require a little bit more work (a dremel helped a lot) but once you're done it'll be sweet Once you get the kit the instructions can be found here: http://www.ckrccrawlers.com/infockrc...on-p-2453.html

[swiftneed]

Thanks

[ta_man]

Originally Posted by IGT_7x

Thanks, yes it is custom, actually it's from CKRCcrawlers.com, they have it as a kit. I just went ahead & used a Sidewinder ESC & Velineon motor, it should be enough since I'll be using 2-3s lipo. As far as the Slash it's been one hell of a truck, tough as nails.

Did you do that klugy thing with the Traxxas sliders for the front or find a better way?

[IGT_7x]

Yes I did till I find a long enough dogbone to replace it, but I've tested it & so far it's holding up.