MaxAmps Race Edition Lipos

[DrKnow65]

Is this a data log with the *150* C packs?
If so what is the Mah of the packs?
And how low is your cutoff set???

P.s. thanks for posting up a graph

[josh9mille]

Originally Posted by DrKnow65

Is this a data log with the *150* C packs?
If so what is the Mah of the packs?
And how low is your cutoff set???

P.s. thanks for posting up a graph

I think the 150c packs are all 6500mah

[Arct1k]

Originally Posted by josh9mille

I think the 150c packs are all 6500mah

Correct...

Unfortunately it snowed last night so a comparison set of charts is off for at least 2 weeks...

[padrino]

I'm on travel so I can't post the graphs but I'm seeing spikes above 200A consistently. I'm running a 5T (many aluminum goodies) with Thunder Power 50C batteries.

One question I did have was the sample rate, I assume all of the samples are point in time so the system simply does a read on the tick it should. I set the rate at the highest (100ms) to make sure I had the greatest chance of catching things but even paring down the values recorded still only results in ~8m of log time. Based on my work on programmable circuits I assume it's done this way given basic constructs however I wanted to mention it in case I'm off base.