Hot bodies 1/8 diffs

Thats definitely a oddity. I Have 3 sizes and you 2 from the same part no.

[cmac]

Originally Posted by dtnel

Thats definitely a oddity. I Have 3 sizes and you 2 from the same part no.

So there are two different types of upper a-arm pins "long" and "longer"? That would also mean that your bag would have 12 pins in it, right?

Originally Posted by cmac

So there are two different types of upper a-arm pins "long" and "longer"? That would also mean that your bag would have 12 pins in it, right?

I have 8 in the bage. Note the 3 different sizes,

Originally Posted by dtnel

I have 8 in the bag. Note the 3 different sizes,

I need to get my Ofna hyper 7 diffs shimmed so I can get them wrapped up but I drag my feet as usual. I did go and buy a box of the RC Screws this past week so this truck will get the silver bolts. Wish I had the money to color my chassis and such a purple or something like that though.

[cmac]

Thanks, I see. Are you going to use UE arms too? I think there is just more material on the outer parts of the upper A-Arms, and that's why the pins are not long enough. The bottom pins are perfect. I think the UE ti-pins will do the trick, and I will be able to use the Fast lane uppers on my original E-Maxx. Thanks dtnel.

Originally Posted by cmac

Thanks, I see. Are you going to use UE arms too? I think there is just more material on the outer parts of the upper A-Arms, and that's why the pins are not long enough. The bottom pins are perfect. I think the UE ti-pins will do the trick, and I will be able to use the Fast lane uppers on my original E-Maxx. Thanks dtnel.

I have the rpm true track on my old one that'll get converted over and the fronts will get swapped to rpm as well. I think when I'm done I'll be able to still have a 3rd emaxx (3905 spec) from all the extra parts since I have a complete motor setup as well. I have some decisions to make because I have 3 3906 trucks as well. I want one for water, one for a 3 axle project, one for a "pretty" truck, one for a basher.

I don't race so it looks like 2 of the oldest 3906 trucks will go or get parted out. I don't even think they'll bring much for parts on ebay unless someone is into restoring them as show trucks or something.