Inferno GT2 build

[KMN]

Originally Posted by brainanator

is the chassis bent in the same place as the blue one that came with it? Crazy that this thing has seen 2 bent chassis already!

I'm not sure if the blue chassis that came with it is an original GT chassis, or a MP777 buggy chassis. When I compare it to pictures, it's either an 777 chassis, or SP buggy chassis, not a GT or GT2 chassis. The blue one is just beat, someone beat the crap out of that chassis. The red one is tweaked at the rear diff. I'll grab some pic's of just the red chassis, which has one scratch on it.

I'm really just upset that I could probably melt down some beer cans and make a stronger chassis.

sucks that happened , how is it geared ? Maybe that tekin on 6S just had so much torque that it warped it . Ive got a GT2 VE and was looking at the upgraded chassis brace , but also would like a carbon chassis . If you got it from amain or tower Im almost postive if your within the return period they might replace it free . Goodluck

[Big House]

I have a IGT2 as well and the first thing I plan on doing is dumping the metal chassis for a custom cut 4.4mm carbon fiber chassis. I also think these cars would greatly benefit from a top plate as well.

[KMN]

Here's a few updates. This thing is fun. I've replaced the steering with MP777 goodies and mounted a Savox .1 second servo on it. So far, there have not been any issues with the chassis, however the Kyosho wheels and tires I bought to bash around are completely trashed after three runs. I'm going to stick with my Sweeps from now on, they've never given me any issues and actually have traction.







No problem with the old Sweeps on there....