My truck / one moretry

[Rtsbasic]

Nice mount, i've been putting off fitting my warrior to my emaxx till I can find a way to mount it nicely. I took your idea and modified it a bit - i'm now using an rc10 battery cup secured to the spare motor hole. Gives it lots of extra protection in roll overs and harsh impacts as well.

Btw I fit a new plug to my one of them UBEC's on ebay, works very nicely now, you wouldn't believe how light these things are.

[sjcrss]

man...with all this talk about the UBEC's....makes me want to ditch my AA 1100 mah rec pack I made.....it doesn't weigh alot.......the only prob I have is the same batt that I use for the servo (ie the AA pack) i use to power my small fan above my Bl controller......and if I went to a UBEC...I'll have to wire that in some how to....I've tried wiring directly to my batts...and the fan doesn't last to long on 14.4 V...trust me......If I picked up a UBEC...I thought about wiring it inbetween the UBEC and the Rx........at the moment I have other pending items to pick up.....OH wellll...sorry to hijack your thread Neweuser...

[coolhandcountry]

If you not running a thrid channel could pug it there. If not could use a y connector for it to.

[Rtsbasic]

You could wire the fan to the UBEC output very easily.

I reckon it would be well worth you doing, AA's are a bit limiting on how much power they can put out in bursts, a 6v UBEC would probably make the steering slightly more responsive, and drop quite a bit of weight.

[neweuser]

no prob with the hijack....happens all the time! If you need help you need help. and sometimes throwing a line in instead of a whole new thread is easier.