 |
|
|
|
|
|
 |
 |
RRP Slipper |
 |
|
 |
|
(#1)
|
|
RC-Monster Titanium
Offline
Posts: 1,256
Join Date: Jan 2006
Location: Canada
|
RRP Slipper -
09.02.2006, 08:06 PM
hey guys will the Robinson Racing Small Slipper Clutch Plate Traxxas, work on the ofna 51 tooth spure?:013: pic:
|
 |
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Mod
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
|
09.02.2006, 08:12 PM
Yea, it just requires a few holes to be drilled. It's actually slightly smaller than the spur so be sure to make it lined up.
|
 |
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
Guest
Posts: n/a
|
09.02.2006, 08:28 PM
yes it works. i just pressed the cluch plate in the spur with the vice and drilled new holes. one thing you will have to do is grind down the original holes to fit the slipper plate on.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Mod
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
|
09.02.2006, 08:31 PM
Cemetery, I think you have the large one and not the small one.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Titanium
Offline
Posts: 1,256
Join Date: Jan 2006
Location: Canada
|
09.02.2006, 09:27 PM
any of you have a picture of it onn?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
|
Guest
Posts: n/a
|
09.02.2006, 10:16 PM
Quote:
mike, you can see a pic in this thread http://www.rc-monster.com/forum/showthread.php?t=3923 |
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
RC-Monster Mod
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
|
09.02.2006, 10:20 PM
Thats odd...I coulda swore mine dropped in the 51T spur witha few mm on each side. I could be mistaken though...
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
Guest
Posts: n/a
|
09.02.2006, 10:24 PM
mine was just like .25mm short of just dropping into place so i pressed it in and it was perfectly round too...
|
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Titanium
Offline
Posts: 1,256
Join Date: Jan 2006
Location: Canada
|
09.02.2006, 10:26 PM
do you still need the strobe pads or from there you can use the rrp slipper clutch ect... pics anyone???
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC Monster, the Final Frontier
Offline
Posts: 3,379
Join Date: Feb 2006
Location: Minnesota
|
09.02.2006, 11:32 PM
I don't have pics, but i run the rrp on my girls mostly stock set up and the pads are fine...the reason most people go with the strobe is because the mod 1, the pads, and durability. But the rrp is fine.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
RC-Monster Mod
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
|
09.02.2006, 11:34 PM
You just can't allow any slip...
|
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
RC Monster, the Final Frontier
Offline
Posts: 3,379
Join Date: Feb 2006
Location: Minnesota
|
09.02.2006, 11:51 PM
Make sure it's tight!!!! I;m taking hers off to put the strobe on it, i don't have any pinions that are 32 pitch besides a 16, and it's way tooo much torque! But i have like 4 5mm pinions for her if i use mod 1 with the strobe....so my gearing options are better, especially cuz she's running only 14 cells!
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
