Look at this! This thread has more than 10'000 hits! :)
And the good old truck is still going strong! When I look at it now it seems obsolete and like a hack job, all beaten up, nothing with what I would show up at a track, but it does a great job as basher. We bash it really hard.
Thank all of you who posted here.
DAF
RC/DC - Brushless Conversions since 2000 !
>>>>>>>>> www.rc-dc.ch <<<<<<<<<<
If your looking for 30-40 minute run times, go with a 8000mah lipo's. I usually get bored after 40 minutes and they're still at 7.4V per pack. You could do the 4000's or 6000's if you want less weight.
I tried the 9920 with a 10XL setup, but ended up with a HV 4.5 System. I love there customer service and support. And don't have to wait forever if I need servicing. Here's my G2R setup: (ignore the tire direction, I was in a hurry to take the pic)
I've since replaced the bats with the lipos and added the spektrum telemetry kit for temp and voltage monitoring.
wow CHC, how are you accomplishing the run times? i run 8000mah on a 9xl, and get about 30-40min of run time on 5s, but they only have three runs on them...
"if you've got something to say, say it peacefully"
they have different KV ratings 1667 for the 9xl and 1502 for the 10xl (i think).
in my e-maxx i run a 9xl on 16 cells and i am soon to get 5s lipos too. speed and power is really insane. geared 18 51, 14.6 wheel base and it still does wheelies..............
Cemetery is correct. The 9xl will run a tad warmer than the 10xl. i run 5s lipo on my 9xl. It's pretty quick, would call it that insane, but quick. i have mine geared 16/51 on 5s. May try the 18 soon to see how hot she gets..:)
"if you've got something to say, say it peacefully"