Lipo and Quark questions - RC-Monster Forums

jhautz · 01.20.2007, 03:28 PM

Yes just charge them both all the way up and balance them. Then check the voltage. Take the 3s pack and divide by 3 and take the 2s pack voltage and divide by 2. They should be equal within .05V for a well balanced pack.

phidailo · 01.20.2007, 03:44 PM

thank you :)....I will let you guy know how they do, plus I upgraded from 9xl to neu 1515 (1700kv)

jhautz · 03:50 PM

Quote:

Originally Posted by phidailo

thank you :)....I will let you guy know how they do, plus I upgraded from 9xl to neu 1515 (1700kv)

Your whole system will run much cooler. Great ugrade. Plus the Neu will feel like it has more low end grunt if you can believe that.:027: Top end will be pretty much the same.

What ESC are you running? Quark I'm asuming...

phidailo · 01.20.2007, 04:10 PM

I have the quark125. I only have 16 and 20 pinion but think 18 will be perfect. I tried the neu on 16 cells gp3300's and can notice the cooler temps and a little bit on low end.

phidailo · 01.20.2007, 06:11 PM

Had a chance to run the lipos for about 5 minutes with the Neu and I am truly amazed. There is so much power and acceleration. I am running 51/20 but going to go down to 51/16 next time.

phidailo · 01.21.2007, 04:01 AM

I forgot to add: How does the LVC work on the quark. Not familiar with these and need to know how welll it works to keep the lipos in tip top condition