baja 5b bl

Originally Posted by Serum

Well, you can always get a 2240 and loose some of it's torque on gearing. that's a good way to go. the 2240 is only a bit more expensive.

I am pretty positive a 1950 can pull that sled fast enough. But that depends on how many cells are feeding that thing.

lol how many cells should there be????

and i hear ya on the motor lol and 400 isnt too bad, nut how bad is the speedy going to slap me?

[Serum]

are you going to use the mechanical brake? and a pistol transmitter or stick?

Do you want to use lipo or nimh? lipo keeps the weight relative low.

[neweuser]

I would go Lipo too. It would be a nice conversion, but I think a costly one?

Originally Posted by Serum

are you going to use the mechanical brake? and a pistol transmitter or stick?

Do you want to use lipo or nimh? lipo keeps the weight relative low.

i dont want lipos, ni-mh for now and i wil end that when i get sick of them

pistol grip controler..... i dont think it will be horrible lol no more than my e revo with all the nice parts, just the cost of the car will be bad, i found some on flea bay for 800 and free shipping:018:

[coolhandcountry]

Well first off. I would get the car and see about the weight before I make a judgement
on motor size. As for tire size they are not much bigger than we run on a maxx
or revo ir not a smaller than some. The esc is going to cost you.
If you don't mind. What happened with you and lipo?

well i have had 5 vent lol one blew cause i dropped it, and 3 went from crasing with my mini t (witch costed me the li pos and the mamba speedy) and the other 2 went because they got e jected in a crash with the mini t lol and i just really havent had the urge to do the unsafe more power vrs more safe less power, and i know that they can really go also but i havent had one problem with them will worse crashes and water and what not so yeh lol

and yeh i figured that i needed wieght, but i think i will do a 22 series lol i know that it will have power

[coolhandcountry]

The 2250 on the right voltage will destroy alot of things.

[glassdoctor]

My first thought for a nice 1/4 scale setup:

Schulze 40.160 so you can go high voltage... a must for a car this big. It's huge enough to look proper in the car too. :)
Neu 1521/27 or even a Neu 2215 for more $$$
and a big 8s-10s lipo


:)

Originally Posted by coolhandcountry

The 2250 on the right voltage will destroy alot of things.

sweet!!!! lol they looks tough as heck, im mean the diffs and all that stuff is metal:018:

we will see how it goes lol:eek:

[skeeler]

Has there been any more progess on this BL Baja 5B?

[BP-Revo]

I beleive E-Maxx Rock's is giving up all current projects in order to race On-Road.

However, for an awesome setup in the Baja 5B, I would run a Lehner 2280 on something like 8S or 10S. This should give it plenty of power.

yup bp is correct... lol im getting a cyclone moore speed edition.. 500 bucks:013:

lol so far i have sunk 1578 bucks so far lol... now the wait:mad:1 and my car and speedo are on back order:mad:1 lol but it will be sick


but yeh, i aggree that would be a sick power set up

and btw, giving up is so harsh =P i say putting as-side hehe

[BP-Revo]

I thought you were selling your FLM pede and all - isn't that pretty much giving it up. IIRC all you have is your 18SS and Micro T left. ;)

lol I know what you mean. I know it can be hard. To have my G2R put out of commission by a blown motor system AND bent chassis is killing me...I'm dying to see that thing blaze down my street.

i am, i still have a

mini quake,
mini inferno,
mini t
micro t
e revo
xxx s sport
nitro rs4 rtr, which has a mm in it =P
tlt
and a few x mods lol

im not nearley sellin em out lol.. just i know the flm pede is what im going to get money out of so thats why its going.. sadly

and soon to come cyclone moore speed :D