Fitting new batteries in old trays?

[xjbebop]

I've seen that the proline saver is still available. any other choices besides the ue (?) one for $90???

[suicideneil]

The stock bellcrank is pretty good- its the actual servo & white plastic saver that are poo-poo. I would go onto towerhobbies and order the 'Kimborough servo saver for large gas truck' and the a hitec hs645mg servo- that is what I and alot of other guys use and its a perfect combo. There are other servos available but that one is a great buy-

http://www2.towerhobbies.com/cgi-bin...&I=LXUZ89&P=ML

and the servo saver-

http://www2.towerhobbies.com/cgi-bin...&I=LXS443&P=ML

both those will set you back about $41 + p&p- not bad at all really.

[xjbebop]

Originally Posted by suicideneil

The stock bellcrank is pretty good- its the actual servo & white plastic saver that are poo-poo. I would go onto towerhobbies and order the 'Kimborough servo saver for large gas truck' and the a hitec hs645mg servo- that is what I and alot of other guys use and its a perfect combo. There are other servos available but that one is a great buy-

http://www2.towerhobbies.com/cgi-bin...&I=LXUZ89&P=ML

and the servo saver-

http://www2.towerhobbies.com/cgi-bin...&I=LXS443&P=ML

both those will set you back about $41 + p&p- not bad at all really.

Good info! Thanks!! I hadn't heard of the Kimbrough saver. I picked up each of these at my lhs on the way to work for $45 total. I'll get 'em installed tonight or tomorrow and report back.

[xjbebop]

got the new servo/saver installed. definite improvement! I wouldn't call it night&day difference, but it's stronger than it was (stock). if I was being picky, I'd like it a little stronger still and faster, but for the money, that was a good upgrade.
Thanks guys!

[suicideneil]

You're more than welcome.