RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#16)
cmcclive
Guest
 
Posts: n/a
06.30.2008, 10:47 AM

the individual parts are now officially available from shopatron...
A bit pricey though.
I just picked up the motor mount and fan for $50 plus $9 shipping, where as if I would have just bought the kit from amain it would have been $85 plus around $6-8 shipping and I could have re-sold the battery boxes and probably come out ahead...
I guess I should just be happy they are selling the parts individually though...
   
Reply With Quote
Old
  (#17)
NovakTwo
Senior Strategist
 
Offline
Posts: 383
Join Date: May 2007
06.30.2008, 11:03 AM

When we established the pricing for the replacement parts for the conversion kits, the list prices for the separate parts added up @ to the LP of the complete kit.

However, retailers do not discount accessories nearly as much as they do the finished products---LHSs have to make money on their accessory sales. Therefore, accessory prices have very little discount from the mfg's list prices.

Since, the on-line sellers are a bit slow in uploading accessory listings, our SAT prices are initially set not to undercut their eventual prices. If those prices come in a lot lower, we will adjust the SAT prices because soon the SAT orders will be fulfilled by our SAT dealer network


Quote:
Originally Posted by cmcclive View Post
the individual parts are now officially available from shopatron...
A bit pricey though.
I just picked up the motor mount and fan for $50 plus $9 shipping, where as if I would have just bought the kit from amain it would have been $85 plus around $6-8 shipping and I could have re-sold the battery boxes and probably come out ahead...
I guess I should just be happy they are selling the parts individually though...


Novak Electronics, Inc.
   
Reply With Quote
Old
  (#18)
Desmo
Guest
 
Posts: n/a
06.30.2008, 09:28 PM

I'll buy more ;). I'm happy with the way they fit in my elst. I'm going to do an outrunner eb4-s2 buggy next. I might sell the motor mount since my kyosho deal fell thru(dam ebay).
   
Reply With Quote
Old
  (#19)
Desmo
Guest
 
Posts: n/a
07.01.2008, 12:25 AM

any word on making longer versions to hold 165mm lipo's?
   
Reply With Quote
Old
  (#20)
NovakTwo
Senior Strategist
 
Offline
Posts: 383
Join Date: May 2007
07.01.2008, 01:15 PM

No current plans, but we will keep suggestions in mind.

Quote:
Originally Posted by Desmo View Post
any word on making longer versions to hold 165mm lipo's?


Novak Electronics, Inc.
   
Reply With Quote
Old
  (#21)
suicideneil
Old Skool
 
suicideneil's Avatar
 
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
07.01.2008, 07:03 PM

I'd like to suggest more hot girls used in promo photoshoots for Novak products- appeal more to your main demographic
   
Reply With Quote
Old
  (#22)
NovakTwo
Senior Strategist
 
Offline
Posts: 383
Join Date: May 2007
07.02.2008, 11:05 AM

Who knew that our major demographic was dirty old codgers?

Quote:
Originally Posted by suicideneil View Post
I'd like to suggest more hot girls used in promo photoshoots for Novak products- appeal more to your main demographic


Novak Electronics, Inc.
   
Reply With Quote
Old
  (#23)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
07.02.2008, 11:17 AM

You also have alot of dirty young codgers too...

Me included...

I am sure that Bob likes "attractive promo ladies" as much as the next guy...
   
Reply With Quote
Old
  (#24)
TexasSP
Something, anything, nothing
 
TexasSP's Avatar
 
Offline
Posts: 2,747
Join Date: Mar 2006
Location: Houston, TX
07.02.2008, 11:53 AM

Linc would probably prefer bananas! In fact whoever puts a banana in their ad would be guaranteed to have linc's business for life.

But for the rest of us, hot promo girls are the way to go!

(ps: neil would probably like girls in the promos that would get you arrested )


www.cubicle101.com
A friends comic strip website.
   
Reply With Quote
Old
  (#25)
cmcclive
Guest
 
Posts: n/a
07.03.2008, 08:00 AM

Quote:
Originally Posted by cmcclive View Post
the individual parts are now officially available from shopatron...
A bit pricey though.
I just picked up the motor mount and fan for $50 plus $9 shipping, where as if I would have just bought the kit from amain it would have been $85 plus around $6-8 shipping and I could have re-sold the battery boxes and probably come out ahead...
I guess I should just be happy they are selling the parts individually though...
For anyone that was interested in buying these parts individually...
I placed an order via shopatron (novak's sells their own stuff there...) on Monday for the motor mount and fan.
I got an "update" email yesterday (that I didn't read until this morning) that said the parts would not be available until next week from shopatron yet the website implied they are available now.
Based on that, I canceled the order and placed an order with amainhobbies.com (they get to much of my small parts money....) and for $45 more I get the battery trays (which I don't really need) and the motor mount to buggy adapter plate (which I also don't need). Now, I do not need these extras, but at least I trust amain to be honest if they have something ready to ship out the door.
I suppose I shouldn't be in to much of a hurry though, as Novak's Non-Warranty repair group has been looking over my motor/esc to figure out which component fried. Sorta expected to hear from them to at least admit they have received it and are diagnosing it....
All in all, I find if you email or call Novak they are very friendly and helpful. Placing orders it seems and non-warranty repairs (money for them) do not seem to be so efficient.
Yes I expect NovakTwo to reply back about how either my situation is the exception not the rule, or that I am being unfair and expect to much out of them. But last I checked Novak billed itself as a leader in RC electronics/accessories... and I am just getting impatient (two days to have an auto-email let me know the product was actually not in stock, and 4-5 business days without even getting a "we are looking into your problem" email...).
Hopefully, the repair group gets back to me next week (doubt I will hear anything today), it will be fixed and it will never break again, but I think that I might finally be willing to agree with the opinion on this board that the HV-Maxx w/ HV4.5 motor is not that reliable. Of course, had I known that the HV4.5 was only meant for speed runs (which is what the website states now) I wouldn't have purchased it, but hindsight is 20/20. When I hear from Novak Non-Warranty I will reply back to let anyone who cares know if my motor or esc or both was fried...
   
Reply With Quote
Old
  (#26)
NovakTwo
Senior Strategist
 
Offline
Posts: 383
Join Date: May 2007
07.03.2008, 10:27 AM

A couple pf comments:

We maintain the Shopatron store for the benefit of our national network of SAT dealers. Novak only fulfills the orders if--after a couple of days---no dealer in the network accepts the order for shipping. I have forwarded all of your comments to the folks at Novak in charge of the departments related to your comments.

I will check later today on the problem with your SAT order. Even if items are available at the factory, they may not yet be delivered to our finished product inventory that day--especially new items with high demand.

We do not examine or service items that are returned for repair. We replace everything with remanufactured items with a new 120 day warranty. These items are returned and include all items offered with original purchase; fans, cap modules etc. We charge for NW price replacement according to our replacement options guide. For items still under warranty, there is no charge

As to the 4.5 system speed run advice---that was added in conjunction with the release of the conversion kits (and refers to use with the kits), not with the earlier release. However, we can replace the system that you returned with any other value HV motor that you select---5.5, 6.5 or 7.5. Just email cs@teamnovak.com and PM me so I can follow up.

Your HV esc will be replaced with a newly programmable version (with external 4 cell Smart Stop module.) I apologize for any delays, but we do not contact customers when we receive items for service because our turn-around time is generally quite fast.


Novak Electronics, Inc.
   
Reply With Quote
Old
  (#27)
NovakTwo
Senior Strategist
 
Offline
Posts: 383
Join Date: May 2007
07.03.2008, 10:38 AM

Here is the response I received from our Operations officer:

Quote:
Jackie:
If you receive any other accy orders that we state "now available", please let Lxxxx know. She can expedite the parts to avoid this problem. Sorry, I didn't see this order. There are quite a few items with this situation. We have all of the parts in the building but they are not finished up as accy items as our system is currently not showing demand (distributor orders). Thanks.


Novak Electronics, Inc.
   
Reply With Quote
Old
  (#28)
cmcclive
Guest
 
Posts: n/a
07.03.2008, 11:18 AM

Quote:
Originally Posted by NovakTwo View Post
A couple pf comments:

We maintain the Shopatron store for the benefit of our national network of SAT dealers. Novak only fulfills the orders if--after a couple of days---no dealer in the network accepts the order for shipping. I have forwarded all of your comments to the folks at Novak in charge of the departments related to your comments.

I will check later today on the problem with your SAT order. Even if items are available at the factory, they may not yet be delivered to our finished product inventory that day--especially new items with high demand.

We do not examine or service items that are returned for repair. We replace everything with remanufactured items with a new 120 day warranty. These items are returned and include all items offered with original purchase; fans, cap modules etc. We charge for NW price replacement according to our replacement options guide. For items still under warranty, there is no charge

As to the 4.5 system speed run advice---that was added in conjunction with the release of the conversion kits (and refers to use with the kits), not with the earlier release. However, we can replace the system that you returned with any other value HV motor that you select---5.5, 6.5 or 7.5. Just email cs@teamnovak.com and PM me so I can follow up.

Your HV esc will be replaced with a newly programmable version (with external 4 cell Smart Stop module.) I apologize for any delays, but we do not contact customers when we receive items for service because our turn-around time is generally quite fast.
I neglected to mention in my previous post (but did let the non-warranty people know in my letter) that after talking with charlie@teamnovak.com he recommended that I send in both the ESC and motor as he could not diagnoss which was broken without testing them. When I called customer service before sending out the system they told me they would replace whichever item (motor/esc) was broken, thus I do not know if it is the motor or the ESC that will be replaced (hopefully not both due to the cost issue).
I suppose I was a little harsh this morning, I have been having a stressful week that the motor mount not yet being shipped pushed me over the edge, and Iwas hoping to get the stuff back this week so I wouldn't miss another race (I realize that I was being optomistic in that hope).
   
Reply With Quote
Old
  (#29)
NovakTwo
Senior Strategist
 
Offline
Posts: 383
Join Date: May 2007
07.03.2008, 11:26 AM

Quote:
Originally Posted by cmcclive View Post
I
....I suppose I was a little harsh this morning, I have been having a stressful week that the motor mount not yet being shipped pushed me over the edge, and Iwas hoping to get the stuff back this week so I wouldn't miss another race (I realize that I was being optomistic in that hope).
I surely get the stressful week part! Under the circumstances, I probably would be as grumpy as you...

If you still want the motor mount, I can have Jackie send you one N/C today. PM me your shipping addy.


Novak Electronics, Inc.
   
Reply With Quote
Old
  (#30)
cmcclive
Guest
 
Posts: n/a
07.03.2008, 11:29 AM

I already ordered the whole conversion kit from amainhobbies.com. I guess this way if I decide to not use huge batteries, I can convert it the "proper way" instead of my hackjob (there are pictures in the buggy forum "mp777 sp2 brushless" or something along those lines).
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com