12020 Question - RC-Monster Forums

toby · **12020 Question -** 10.31.2005, 03:39 PM

There is a lot of wires coming off of this thing, 6 blue ones and two black and two red. could someone tell me what to do with all these and where to solder them?

Dafni · 10.31.2005, 03:54 PM

Just treat the pairs as if they were one wire!
You'll get 3 motor wire pairs, and a black pair and a red pair.

I take it you have some experience with BL, so I wont type the whole story. But feel free to ask if you get a problem.

toby · 10.31.2005, 03:55 PM

actually i have NO experience with BL just my mamba. what are th eblue wires for?

squeeforever · 04:04 PM

the blue wires go to the motor. there is 6 and there in pairs. just solder the female connectors to the motor wires and the male connectors to the blue wires.

http://www.rc-monster.com/forum/show...5&pagenumber=2

theres a picture of mine all wired up.

toby · 10.31.2005, 04:08 PM

can you send me a full size pic to vwghiadude@Hotmail.com

Dafni · 10.31.2005, 04:11 PM

Just wire each pair of bleu wires to a motor lead. Order is not relevant.

And wire your cells between the Black and Red pair. If you use 2 packs, wire in a way so that all cells are in series.

toby · 10.31.2005, 04:13 PM

ok, how come it is two wires to each motor lead?

toby · 10.31.2005, 04:26 PM

i know how to wire it all now. next step is BATTERIES. Yay

nbcaznmaster · 10.31.2005, 04:47 PM

lol! u jumped into a 12020 without a 9920 first! lol, have fun bro!

toby · 10.31.2005, 05:23 PM

I will, i am trying to find a spot to momunt the ESC right now though, it is kind of hard

i might need to mount it on the outside of the TVP for now, there is NO room at all,

squeeforever · 10.31.2005, 05:25 PM

here this picture might help with the wiring.

Dafni · 10.31.2005, 05:39 PM

toby, I would keep the ESC on the inside of the TVPs. Or when you want to put it on the outside, make a cover.

Did you get a warrior or micro, btw?

toby · 10.31.2005, 06:07 PM

warrior, i cannot find any room for it on the inside, so i dunno where to mount it

Nick · 10.31.2005, 06:10 PM

Quote:

Originally posted by squeeforever
here this picture might help with the wiring.

Does the 9920 have 6 wires like that? Where they need to be paired for the motor? If so I need more connectors! Might just direct solder them...

toby · 10.31.2005, 06:14 PM

i am going to direct solder them to the motr, can i cut the blue wires down a bit?