Quote:
Originally Posted by Routybouty
Yea it does. But only at the very top of the travel. I put a tiny notch in the arm and it doesn't really hit now. Kinda bums me out because I sent an e-mail to here and asked if it would hit with my motor, conversion kit, and the heat-sink and I was told it wouldn't.
|
Flip the front motor plate over, and it will sit slightly higher, allowing the motor to clear the arms. By the pics on the first page you have it attached so that the motor sits lower. Tekno did this on purpose so that longer motors could clear the arms, or shorter motors could be mounted lower to drop the cg a bit.
Threaded Mode
