WhataNut FMA PowerLab8 1000W charger

[snellemin]

I thought I blew the charger, by messing up the balancing wires while the charger was active. I didn't blew fuses, but did hear some popping. Long story short, I opened the bad boy and saw that the current limiter was popped. I was only able to charge through the balancing cables. Digikey to the rescue and all is well again. This time I bought me some parallel balancing adapters to prevent me from goofing off again.

[MindThoughts]

Yikes-
Will you please tell us exactly what you did, in order that we may avoid such a mistake?

PS. I'm glad you didn't get your fingers burned, nor get a shock. I'm also glad your charger is still working properly :)

Originally Posted by snellemin

I thought I blew the charger, by messing up the balancing wires while the charger was active. I didn't blew fuses, but did hear some popping. Long story short, I opened the bad boy and saw that the current limiter was popped. I was only able to charge through the balancing cables. Digikey to the rescue and all is well again. This time I bought me some parallel balancing adapters to prevent me from goofing off again.